Nº D-10909
Nylon shell, attached hood, centre zip, side pockets — uniforms, trips, events.
Made for: Fashion & retail.
Sample printed on nylon / polyester taffeta 80 gsm; style: hooded nylon jacket.
Sample size size L · 630 × 720 mm.
A hooded nylon windbreaker: attached hood, centre zip, two side pockets, elastic cuffs — company uniforms, trips, outdoor events, big back prints.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Size L · 630 × 720 mm; your print keeps its true scale on the product.
Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.
The sample is nylon / polyester taffeta 80 gsm, on a dieline drawn at the size you type.
A hooded nylon jacket is sewn from single-layer nylon or polyester, or two layers with a mesh lining: split front with a centre zip, a back, raglan or set-in sleeves and a three-panel hood sewn into the neck. Two side pockets with zips or flaps, elastic or drawcord at hem and cuffs. Better waterproof jackets also tape the seams.
Taffeta, light Oxford or windbreaker fabric of 60–100 gsm, PU-coated or DWR-finished; two-layer versions with polyester mesh lining breathe better for long wear. Thin windbreaker fabric packs into its own pocket, good for travel and event uniforms. Nylon is softer and tougher than polyester but takes less heat when pressing.
Catalysed nylon screen ink or low-temperature heat transfer; light polyester can be sublimated. Two-layer jackets can be embroidered, but needle holes reduce water resistance, so avoid embroidery on the shoulders and upper back where rain collects. Reflective logos suit uniforms worn on the road.
Standard placements are left chest (70–90 mm), back (about 250–300 mm wide, 80–100 mm below the collar) and sleeve; keep artwork off the centre zip and raglan seams. For screen print on nylon keep colours few — each is a screen and a pass. PU-coated inner faces can't be printed; print the outside only.
The L sample is about 630 mm across × 720 mm long with an attached hood; the width lets it go over a uniform tee or polo.
The company logo on the left chest, the trip name or slogan on the back, maybe the year; pick a colour easy to spot in a crowd so group leaders can keep track.
Catalysed nylon screen ink for medium and large runs, low-temperature heat transfer for multi-colour logos and small runs.
PU coating and DWR handle light rain; for heavy rain you need taped seams and water-resistant zips.
The names overlap; a windbreaker is usually thin single-layer and packable, while a nylon jacket may be two-layer with mesh lining and more substantial.