Drint

3D mockups · Apparel

V-neck tee

Nº D-10875

Rib-bound V-neck, regular fit — DTG, DTF, screen print.

Made for: Fashion & retail.

Sample printed on 100% cotton jersey (2-way stretch) 200 gsm; style: V-neck tee.

Sample size size L · 550 × 745 mm.

About this mockup

A V-neck tee with a rib binding, regular fit — softer than a crew neck, for uniforms and everyday wear.

Usually holds
Everyday tees, light uniforms.
Who uses it
POD sellers, print shops, labels.
Popular in
The US, Europe, Vietnam.
Also searched as
v-neck tee mockup · v neck t-shirt design · printed v-neck shirt

How to use this mockup

  1. Start from size L · 550 × 745 mm.
  2. Place your print on the print area.
  3. Turn it in 3D, export a picture or video, or stage a scene.

Trade tips

  • Dark garments need a white underbase under the print, or colours go dull.
  • Screen printing is priced by colour: one to three solid colours cost less than a full-colour photo.
  • Stretch and dark fabrics change how a print looks: always make one sample first.
  • Start the print about 7–9 cm below the collar so it sits right when worn.

Questions

Is the V-neck tee mockup free?

Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.

Which sizes does the V-neck tee mockup come in?

Size L · 550 × 745 mm; your print keeps its true scale on the product.

Can I use the mockup pictures to sell and advertise?

Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.

What is the V-neck tee sample printed on?

The sample is 100% cotton jersey (2-way stretch) 200 gsm, on a dieline drawn at the size you type.

Construction

A V-neck tee is sewn like a crew neck but the front neck is cut into a V, bound with a rib that is mitred or overlapped at the point. The V usually drops about 8–12 cm below the neck hollow on a regular fit; the point must sit dead centre, as a few millimetres off shows at once. Front, back, two sleeves and the neck rib are cut separately.

Choosing board and material

100 % cotton jersey of 160–200 gsm suits printed V-necks; compact or combed cotton gives a smoother face and sharper DTG prints. The neck rib should contain spandex so the V keeps its shape through washing; polyester blends are cheaper and shrink less but take DTG ink poorly.

Finishing

Screen printing, DTF and DTG all work; the thing to note is that the front print starts lower than on a crew neck because the V takes the upper chest. A small embroidered left-chest logo suits office V-necks; a large print close to the V stiffens and drags the neckline.

Preparing the print file

Start the front print area at least 40–50 mm below the V point — roughly 8–10 cm lower than on a crew neck of the same size — with a maximum width of about 280–300 mm for size L. The back is unaffected; place it as on a regular tee, about 60–80 mm below the back neck.

Common mistakes

  • Using crew neck print positions: the top of the art touches or dips into the V.
  • Art too wide across the chest: the edges run into the armholes and wrinkle when worn.
  • Neck rib without spandex: the V stretches and twists after a few washes and looks old fast.

Questions and answers

What is the largest front print on a size L 550 × 745 mm V-neck tee?

About 280 × 320 mm, starting 4–5 cm below the V point; taller and the art ends too low near the stomach.

Will a DTF print peel at the rib-bound V-neck?

Keep the transfer off the rib, which stretches the most; 2–3 cm clearance from the neck binding prevents peeling.

Where should the print go on a V-neck tee?

Front art about 4–5 cm below the V point; a small left-chest logo or a large back print works best on V-necks.

How does a V-neck compare with a crew neck as a uniform?

The V-neck looks slimmer and smarter, suiting spa, restaurant and office staff; the crew neck is simpler and easier for big chest prints.

How deep should a V-neck be?

A regular fit usually drops 8–12 cm below the neck hollow; deeper for womenswear, shallower for men's uniforms.

Sizes available

  • size L · 550 × 745 mm

Similar mockups