Nº D-11529
Fried chicken, fries + drink — cup holder on the tray top.
Made for: Food & specialties.
Sample printed on brown-liner corrugated board, uncoated; style: one-piece corrugated box / tray (FEFCO 04xx).
Sample size 220 × 140 × 50 mm.
One-piece corrugated trays folded round the floor: web corners, doubled walls with locks, hand holes, or flap lids on the walls that stand up as a carry handle.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 220 × 140 × 50 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is brown-liner corrugated board with no lamination, on a dieline drawn at the size you type.
One-piece FEFCO 04xx-style trays: the base sits in the middle, four walls fold up, and the corners are either web corners folded diagonally or held by locking tabs, so there is no gap for oil or sauce to leak through. Variants add flared walls, boat-shaped ends, flap lids, double lids, a carry handle formed from two half lids, a cup holder or vents. Trays ship flat and are set up by hand in seconds without glue.
E flute (about 1.5 mm) or F/micro flute (under 1 mm) with brown or white kraft liners for food trays; large produce and display trays use B flute. Fried, oily or saucy food needs a grease-resistant liner or a PE-coated inside that is food-contact compliant; dry bakery items can sit on uncoated white kraft.
One- or two-colour flexo in food-safe water-based ink on the outside is the norm; display trays that need photo graphics are printed offset and laminated onto E flute. Never laminate the food-contact face; leave the inside plain or PE-coated only.
Design on the cross-shaped flat layout: base in the centre, four walls and the web-corner gussets around it. The triangle in a web corner folds inside, so text placed there vanishes or ends up upside down; put the logo in the middle of a long wall. The inside base is where the food sits — keep it plain or use a light pattern.
The hole in the top deck is usually 75–90 mm, fitting a 12–16 oz paper cup; measure the cup body at the height of the deck, not the rim.
The cup rests on the tray base and the deck only keeps it upright; use PE-coated E flute and put the cup hole near one end so the balance isn't too lopsided.
A corner that isn't cut apart: the board at the corner folds diagonally into a triangle that presses against the wall, so the corner is sealed and sauce can't leak.
Yes, when the board and inks are food-contact compliant and the inside is grease-resistant or PE-coated; avoid recycled board of unknown origin on the food-contact face.
Most FEFCO 04xx trays are set up by folding and locking tabs alone; some fast-food trays come with corners pre-glued at the factory so the shop can set them up faster.