3D mockups · Labels, stickers, tags, red envelopes
Nº D-10812
Slips over the neck of wine, cooking oil, fish sauce bottles — no string needed.
Made for: Tết & gifts, Food & specialties, Beverages.
Sample printed on ivory (C1S board) 300 gsm, matte lamination; style: hang tag.
Sample size 60 × 110 mm.
A hang tag printed both sides on thick board, die-cut to a shape with a string hole — price, story or a greeting.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 60 × 110 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is ivory (C1S board) 300 gsm with matte lamination, on a dieline drawn at the size you type.
A hang tag is a die-cut card — rounded rectangle, hexagon, heart, trapezoid and so on — with a string hole, usually reinforced with a metal or plastic eyelet so it doesn't tear. It is attached with cotton string, cord, elastic or a plastic tagging pin; a bottle neck tag has a large round hole that slips over the neck without string. Heavy tags are often duplexed from two sheets to reach 600–800 gsm.
C1S ivory board at 300–350 gsm is the default — stiff, white and printable on both sides; C2S coated 300 gsm gives brighter colour, 300–350 gsm kraft suits handmade goods, and textured fine papers suit premium fashion, wine and gifts. Plant stakes or tags that meet water should be synthetic PP paper or board laminated on both sides.
Matte lamination is the default against scuffing; add foil stamping, blind or registered embossing, spot UV or raised screen ink. Fine papers stay unlaminated to keep their texture and pair well with foil and emboss; duplexing lets a coloured core show as a stripe along the edge.
Build on the cutter guide with 2 mm bleed, a 3 mm safe zone and at least 5–6 mm clear around the hole centre. The back usually carries price, size, fibre content, care symbols and a barcode, or a box for a price sticker; both sides must share the hole orientation so the back isn't upside down. The more sharp corners the shape has, the more a thin border along the cut will show any misregistration, so avoid hairline frames on the die line.
The 60 × 110 mm tag is smaller, in matte-laminated ivory, for fish sauce, oil and narrow-neck liquor bottles; the 90 × 130 mm fine-paper tag is for wine and premium gifts.
The round hole fits the neck snugly, with optional slits to pass over the cap; the shoulder stops it sliding off, so measure the neck diameter before the die is made.
300–350 gsm is standard; for a rigid premium feel, duplex two sheets to 600–800 gsm or use a 350 gsm-plus textured fine paper.
Usually 3–5 mm for string or tagging pins, and about 4–6 mm when an eyelet is set; keep the hole centre about 6–8 mm from the edge so it won't tear out.
Not always, but eyelets stop the hole tearing when the tag is pulled and look more finished; very thick duplexed tags often go without.