3D mockups · Labels, stickers, tags, red envelopes
Nº D-10813
Seal stickers for gifts, wedding cards.
Made for: Tết & gifts, Office & business.
Sample printed on paper decal 80 gsm, gloss lamination; style: sticker label (decal).
Sample size 40 × 36 mm.
Kiss-cut stickers on a liner: the face is cut through, the backing stays whole so each one peels off.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 40 × 36 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is paper decal 80 gsm with gloss lamination, on a dieline drawn at the size you type.
A sticker label is three layers: the printed face (paper or film), the adhesive, and a silicone-coated release liner that peels away. The maker prints on sheets or on a reel, laminates, then kiss-cuts (cutting the face only, leaving the liner) so labels peel one by one, or die-cuts through the liner for loose individual stickers. Labels applied by machine must come on a roll with the right unwind direction and core size for the applicator.
Coated paper facestock of about 80 gsm is the workhorse: cheap and sharp, but it hates water and oil. White or clear PP film (roughly 60–80 micron) is used for fish sauce, cosmetics and chilled goods because it won't wrinkle or go soft when wet. Destructible and VOID films are specialist tamper-evident stocks, and hologram film is used against counterfeiting; textured fine paper is reserved for wine and premium gift labels.
Gloss or matt lamination guards against scuffs and damp; hot foil and embossing suit textured paper; spot UV lifts a logo on matt. On clear film, print a white underlay beneath anything meant to be solid, or the colours look washed out against the pack. Destructible seals usually stay unlaminated, because a film on top stops them tearing as intended; check with the maker before laminating VOID seals too.
Draw on the exact die line with 1.5–2 mm bleed outside it, and keep text and logos at least 1.5–2 mm inside, since the cutter can drift. Keep corner radii above about 1 mm, hairlines no thinner than 0.25 pt and type no smaller than 5–6 pt. On clear film, put the white underlay on its own spot layer; for variable barcodes, serials or QR codes, send the data file for the digital press alongside the artwork.
Sealing wedding invitation envelopes, gift boxes and pastry bags for Valentine's or Tết. The design is usually a couple's monogram or a small logo in the centre.
The bottom point is the first to lift; round it to about 1 mm on the die and place it on a flat surface. Soften the notch between the lobes slightly too so the cut stays clean.
For hand application and short runs, sheets with many kiss-cut labels per A4/A3 work fine. For machine application or long runs, use rolls and state the unwind direction, gap between labels and core size (commonly 76 mm).
Paper labels are cheap, print crisply and take a pen, but don't stand up to water. PP or PVC film is flexible and resists water and oil, ideal for curved or wet containers, at a higher cost and harder to write on.
A kiss-cut slices only the printed face so labels peel off a shared liner. A die-cut goes through the liner too, so each sticker is a loose piece with its own backing — common for giveaways and order inserts.