Nº D-11870
Draught beer, craft beer, cider, kombucha, cold brew coffee — a stainless keg with two rolling rings, a chime with hand holes and a spear valve.
Made for: Tea & coffee, Beverages.
Sample printed on plastic decal (white / clear PP) 0.08 mm, gloss lamination; style: plastic jars, glass jars, bottles (labels).
3 sizes ready, from Ø381 × 250 to Ø381 × 525 mm.
Pails, drums and pots are stock blanks (plastic, tinplate, steel, ceramic) — printed directly or wrapped with a cone label. Wire handles, snap lids and rolling hoops come with the blank; measure the label at the rim and at the base.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — 3 sizes from Ø381 × 250 to Ø381 × 525 mm, or type yours.
Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.
The sample is plastic decal (white / clear PP) 0.08 mm with gloss lamination.
These are large rigid round or tapered containers. PP pails are injection-moulded with a taper, a snap lid with a tear-off tamper band and a steel bail with a plastic grip hooked into two ears. Paint cans are rolled tinplate with a welded side seam, seamed-on bottom and a ring the lever lid presses into; 200-litre steel drums have two raised rolling hoops. Ceramic and cement planters are cast or jiggered, with a drainage hole in the base.
PP pails are usually decorated with in-mould labels (IML), heat transfer or dry offset; small runs use PP stickers. Tin cans are offset printed on flat tinplate before forming, or wrapped in paper or PP labels. Steel drums are painted, screen printed or stencilled and carry oil-proof PP labels; ceramic pots take fired ceramic decals or engraving, cement pots screen print or laser marking.
Labels on pails and cans need lamination or ink that resists oil and solvent, since paint, glue and grease get on them. Glazed ceramic suits fired decals (durable but needs a second firing); raw terracotta suits screen print or engraving. Containers for chemicals need the required safety information and symbols, not just decoration.
Tapered pails and planters need a fan-shaped (arc) label, never a rectangle; straight cans and drums take a rectangle of circumference plus 10 mm overlap. Keep clear of handle ears and the lid bead, with no type in the 10–15 mm under the rim. Chemicals, paints and oils need a safety block, net quantity, directions and hazard pictograms where they apply.
Large runs use IML or heat transfer on the body; small runs use laminated PP stickers cut as an arc to match the pail's taper.
Offset printing on tinplate before forming is the best-looking and most durable but needs volume; short runs wrap a PP or laminated paper label.
Yes: fired decals for glazed pots, screen print for terracotta or cement, laser or sandblast for a subtle single-colour mark.