Nº D-11765
Spices, dried nuts, tea, coffee, kimchi, infused honey — rounded square body, steel screw lid.
Made for: Tea & coffee, Food & specialties.
Sample printed on paper decal 80 gsm, gloss lamination; style: plastic jars, glass jars, bottles (labels).
2 sizes ready, from Ø90 × 97.5 to Ø90 × 177.5 mm.
Glass jars with twist-off lids for honey, bird's nest, fermented sauces, candles — finer than plastic, airtight, reusable.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — 2 sizes from Ø90 × 97.5 to Ø90 × 177.5 mm, or type yours.
Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.
The sample is paper decal 80 gsm with gloss lamination.
Glass jars are ready-made blown or pressed blanks closed with twist-off lug tin caps, threaded aluminium caps, gasketed wood or bamboo lids, or wire-clamp swing tops. The design lives on a wrap or front label on the body, a round lid label and a tamper seal running over the cap onto the jar. Only the straight wall between shoulder and heel takes a flat label; curved shoulders, raised ribs and rounded heels do not.
80 gsm coated paper label stock with lamination is the norm for dry goods; anything chilled, oily, saucy or handled wet wants white or clear PP or PE film labels that resist moisture and do not wrinkle. Clear film on glass gives a 'no-label look' but needs white underprint beneath coloured type. Pick an adhesive rated for curved surfaces, and for cold if the jar lives in a fridge.
Gloss or matte lamination or UV varnish protects against grease and scuffs; hot or cold foil, metallic inks and embossing on kraft or textured papers lift gift jars. Clear and metallic labels show every bubble and speck when applied by hand, so use a machine or a soft squeegee.
Measure the real jar: circumference (diameter × 3.1416) and the straight wall height, then subtract 2–3 mm each end for a small gap, or add 5–10 mm for an overlap. Give 2–3 mm bleed and keep type 2–3 mm inside the trim; a wrap on a round jar shows only about a third at once, so plan a front panel, an information panel and a barcode panel. On jars under about 50 mm diameter, run the barcode vertically so scanners can read it on the curve.
Put the front label on one flat face, clear of the radius corners; an L-shaped label round one corner can work on a large radius, but test it on a real jar.
Yes — the stainless screw lid resists acid better than tin; kimchi ferments and gasses, so do not fill to the brim. Use a cold-rated film label. Two sizes: Ø90 × 97.5 and Ø90 × 177.5 mm.
Laminated paper is fine for dry, shelf-stable goods; PP film resists moisture, oil and cold far better and suits honey, sauces, pickles, cosmetics and anything refrigerated.
Length is the measured body diameter × 3.1416, minus 2–3 mm at each end if you do not want an overlap; height is the straight wall less 2–3 mm top and bottom.
Under Decree 37/2026/NĐ-CP (Article 42, Annex I): product name, net quantity, ingredients, production and expiry dates, the responsible business's name and address, origin, storage instructions, plus any category-specific items.