Nº D-11887
Body wash, shampoo, hand soap — refill pouch to pour back into the bottle.
Made for: Cosmetics.
Sample printed on OPP / MPET / PE laminate (metallized) 0.1 mm, matte lamination; style: stand-up zip pouch (doypack).
2 sizes ready, from 120 × 190, gusset 55 to 150 × 250, gusset 70 mm.
A stand-up pouch (doypack) has a gusseted base that stands on the shelf and a reclosable zip — the most common pouch for snacks, nuts and coffee; add a spout and it holds liquids like juice, baby food and refill detergent.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — 2 sizes from 120 × 190, gusset 55 to 150 × 250, gusset 70 mm, or type yours, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is OPP / MPET / PE laminate (metallized) 0.1 mm with matte lamination, on a dieline drawn at the size you type.
A stand-up pouch (doypack) is two laminate faces plus a W-folded bottom gusset, heat-sealed on three sides; the gusset opens when filled so the pouch stands on the shelf. A press-to-close zipper runs 20–30 mm below the top seal, with a tear notch above it for first opening. Spouted versions have a PE or PP spout welded into the top corner or centre; the product is filled through the spout and capped.
Two- or three-ply laminates: a 12–20 micron OPP or PET print layer, a barrier layer of metallised PET or aluminium foil where moisture, oxygen and light matter, and a 50–100 micron PE or CPP sealant that touches the food; total gauge is commonly 100–150 micron. Kraft paper laminated to PE looks natural but barriers far less than a metallised build. Heavy liquid spout pouches add a nylon ply against punctures and bottom cracking.
Rotogravure prints reverse on the inside of the outer film before lamination, so the ink is buried between plies and does not scuff. Matte or gloss comes from the outer film or coating, and register matte/gloss is possible; a clear window is simply an area left free of white and metallisation. Foil stamping and embossing are rarely practical on pouches.
The artwork lays out front, back and bottom gusset flat; side seals take about 8–10 mm each and the zipper and tear-notch band at the top should hold no key copy. Gravure needs a separate white underlay plate wherever you print on clear or metallised film, and every colour is a cylinder, so keep spot colours lean. Mandatory label copy — name, net quantity, ingredients, dates, producer — usually goes on the back.
Usually OPP or PET outside, metallised PET or aluminium in the middle and PE inside; kraft versions are kraft paper laminated to PE. Pick the barrier by how sensitive the product is to moisture, oxygen and light.
Large runs are gravure printed on roll film, with rich colour that lasts because the ink sits between plies; short runs can be digitally printed on film or use a label on a plain pouch.
Mixed-plastic laminates are hard to recycle; mono-material PE/PE or PP/PP structures are easier, but stiffness and barrier change, so test with the real product.