Nº D-11884
Single-use detergent and softener — hotels, travel, samples.
Made for: Household & chemicals.
Sample printed on OPP / MPET / PE laminate (metallized) 0.1 mm, gloss lamination; style: 3-side seal film pouch.
Sample size 75 × 100 mm.
A three-side-seal pouch is sealed on three edges and lies flat — small, cheap, printed edge to edge; for spices, masks, tea bags and samples.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 75 × 100 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is OPP / MPET / PE laminate (metallized) 0.1 mm with gloss lamination, on a dieline drawn at the size you type.
A 3-side seal pouch is two laminated webs heat-sealed on three edges, leaving one edge open for filling and then sealing; a 4-side seal sachet is sealed on all four edges directly on a form-fill-seal machine running from roll stock. Seals are usually 5–10 mm wide, with a pre-cut tear notch and optionally a round hang hole or euro slot, plus a press-to-close zip or slider at the mouth. It lies flat and cannot stand like a gusseted pouch.
Common laminates: clear OPP/PE or PET/PE when the product should show, OPP/MPET/PE (metallised) for coffee, spices and cosmetics that need light and moderate gas barrier, and PET/AL/PE foil laminate when a high moisture and oxygen barrier is needed. Small pouches run about 80–120 micron in total; the inner PE is both the sealant and the food-contact layer, so specify food-grade film.
Rotogravure is reverse-printed on the back of the outer film and then laminated, so the ink is sandwiched and can't scuff; short runs go digital or flexo. The outer film can be matte OPP for a soft-touch look, or carry spot matte varnish beside gloss areas; foil stamping and embossing are rarely practical on flexible film.
Design on the flat dieline with front, back and seal areas; background can run into the seals, but type and logos stay at least 3–5 mm inside them. On clear film, separate the white underprint as its own spot channel and leave windows free of white; every colour is a cylinder, so keep spot colours lean. Pouches run on automatic machines need an eye mark where the converter specifies and a clear box for the date and lot code.
A 3-side seal pouch lies flat, is cheaper and fast to pack for small single-use portions; a stand-up pouch has a folded bottom gusset to stand on the shelf and usually reseals.
Aluminium-foil laminates (PET/AL/PE) block moisture and oxygen best, metallised MPET comes next, and clear OPP/PE or PET/PE barriers are weaker — fine for fast-moving or low-moisture products.
Gravure needs a cylinder per colour and gives consistent, durable colour for long runs; digital needs no cylinders, so it suits trials and many designs, but spot colours and metallic effects are limited.