3D mockups · Labels, stickers, tags, red envelopes
Nº D-11290
Label roll on a 76 mm core, unwound on its liner with evenly spaced labels — for automatic labellers or hand application.
Made for: Food & specialties, Cosmetics, Beverages.
Sample printed on paper decal 80 gsm, gloss lamination; style: gifts & souvenirs.
Sample size 150 × 300 × 150 mm.
Labels delivered on a roll, on 76 or 40 mm cores — for automatic labellers or fast hand application.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 150 × 300 × 150 mm sample or your own size.
Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.
The sample is paper decal 80 gsm with gloss lamination.
A label roll carries die-cut labels on a continuous liner wound onto a paper core, with the waste matrix between labels stripped away. Labels are spaced at an even gap so an automatic labeller or a hand applicator can dispense them fast. A roll is specified by core diameter, outer diameter, unwind direction and labels across.
80 gsm coated paper for dry goods; white or clear PP, or soft PE for squeezable bottles, wet and chilled products; direct-thermal stock for printed barcodes and prices. Liners are glassine or thin PET; high-speed labellers often need PET. Choose permanent, removable or freezer adhesive for the surface and temperature.
Flexo or digital printing on roll presses, then lamination or UV varnish, foil, spot UV and die-cutting in line. Labels that will be date-coded later need an area left unlaminated or a printable film.
Supply each label with its die line, 1.5–2 mm bleed (rolls need less than sheets), a 1.5–2 mm safe zone, and the 2–3 mm gap between labels. Specify the unwind direction (usually positions 1–8: top, bottom, left or right leading; print wound out or in) to suit the applicator. A 76 mm core suits industrial labellers, 25–40 mm cores desktop printers.
It depends on label height, gap and outer diameter; for example 50 mm labels with a 3 mm gap on a roll of about 250–300 mm outer diameter usually hold several thousand. Ask the printer for the maximum per roll for your labeller.
Yes: a 76 mm core fits semi-automatic and automatic labellers, while hand application peels straight off the roll or uses a dispenser; one standard unwind direction works for both.
76 mm (3 inch) for industrial labellers; 25–40 mm for desktop label printers. Always check the machine you use.
The way labels come off the roll: top, bottom, left or right first, with print facing out or in; it must match the applicator.
Rolls suit automatic labellers and high-volume hand application, fast and consistent; sheets suit small runs, hand application or office printing.