3D mockups · Gifts & souvenirs
Nº D-11220
3 mm clear acrylic, UV-printed with a white underlay, laser-cut with a 2.5 mm clear rim — fan merch, shop gifts, event gifts. For your own shape, build a cut line round the artwork.
Made for: Tết & gifts, Office & business.
Sample UV-printed on acrylic, metal or plastic.
Sample size 40 × 3 × 70 mm.
A clear acrylic keychain, UV printed with a white underlay and laser-cut with a clear rim — fan merch, shop and event gifts.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 40 × 3 × 70 mm sample or your own size.
Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.
The sample is paper decal 80 gsm with gloss lamination.
An acrylic keychain is a clear acrylic piece about 3 mm thick, UV flatbed printed and then laser-cut around the artwork, leaving a clear rim and a hole for the ring. A metal split ring and short chain go through the hole; double-sided pieces are printed as a colour–white–colour sandwich so both sides look right. Both faces carry protective film, peeled after printing.
3 mm clear cast acrylic is the standard, its laser-cut edge polished like glass; 2 mm is lighter but tends to crack at the ring hole. Coloured, glitter, mirror and holographic acrylic exist for special runs; stainless rings outlast plated steel.
UV print with a white underlay below colour areas for solid colour, leaving clear what should stay transparent; printing the back in mirror image leaves a glossy front and protects the ink from rubbing. Spot gloss varnish or glitter ink are options; laser-cut edges are already polished.
Supply three separate layers: colour art, white underlay (usually choked 0.1–0.2 mm inside the colour so no white edge shows) and the cut line. Offset the cut line an even 2–3 mm from the art as a clear rim, with no narrow points under about 1.5 mm. The ring hole is about 3–4 mm across and at least 3 mm from the outer edge.
The narrow portrait format suits standing characters, vertical brand names, mini tickets or cards; round the corners about 3–5 mm so they don't dig into the hand.
Yes, put a phone number or QR code on the back of a shop giveaway; keep the QR at least about 20 mm wide so it scans through the acrylic.
One reverse-printed side is enough for a keychain seen from the front; bag charms that spin freely look better double-sided with a white underlay between.
It scuffs a little against keys, which is why ink goes on the back under the acrylic; a slight haze on the front over time is normal.
Yes — send art on a transparent background and let the maker build a cut line 2–3 mm round it; merge fine details like hair or fingers into the rim.