Drint

3D mockups · Printed bags & accessories

Padded fabric headband

Nº D-11246

Hard headband padded and covered in fabric printed all over the outside, wide at the crown and tapering to the tips — label accessories, gifts.

Made for: Fashion & retail.

Sample printed on canvas for art prints 0.4 mm, uncoated; style: gifts & souvenirs.

Sample size 140 × 160 × 38 mm.

About this mockup

A hard padded headband covered in fabric printed all over the outside, wide at the crown and tapering to the tips.

Usually holds
Hair accessories, women's labels, gifts.
Who uses it
Labels, accessory shops, POD sellers.
Popular in
Korea, Vietnam, the US.
Also searched as
headband mockup · padded headband design · hair band mockup

How to use this mockup

  1. Start from 140 × 160 × 38 mm.
  2. Place your print on the print area.
  3. Turn it in 3D, export a picture or video, or stage a scene.

Trade tips

  • Place a tote’s logo 6–8 cm below the handles so it is not hidden on the shoulder.
  • Canvas totes suit one or two screen colours; non-woven bags one or two solid colours.
  • Stretch and dark fabrics change how a print looks: always make one sample first.
  • Unlaminated paper keeps its natural feel but scuffs easily: fine for short-lived packs.

Questions

Is the padded fabric headband mockup free?

Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.

Which sizes does the padded fabric headband mockup come in?

140 × 160 × 38 mm; your print keeps its true scale on the product.

Can I use the mockup pictures to sell and advertise?

Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.

What is the padded fabric headband sample printed on?

The sample is canvas for art prints 0.4 mm with no lamination.

Construction

A padded fabric headband has a rigid plastic arc, a layer of foam for volume and an outer cover of printed fabric; the fabric edges fold under and are glued or stitched on the underside. It is wide at the crown and tapers to the tips, which are fully covered so they don't dig in behind the ears.

Choosing board and material

The cover is usually polyester satin, velvet, cotton or silk; the sample uses printed canvas. Polyester allows vivid sublimation; 5–15 mm foam gives the puffed shape.

Finishing

Sublimate or digitally print the fabric before covering; a matching knot or bow can be added at the top (knotted headband). Velvet holds deep colour but prints fine detail less crisply than satin.

Preparing the print file

The fabric template is a long oval, wide in the middle (about 60–80 mm before covering) and narrowing to the tips, with 15–20 mm to fold under. Use a small repeat or a design symmetric about the centre, because the band curves over the head and the middle is what shows most.

Common mistakes

  • A logo at the tips: hair covers it and the taper makes it unreadable.
  • A large one-way motif: half the band looks upside down from the front.
  • No fold allowance: the plastic core shows underneath.
  • Fine lines on velvet: the image loses sharpness and spreads.

Questions and answers

What do the headband's 140 × 160 × 38 mm dimensions mean?

About 140 mm across between the tips, 160 mm from crown to tip and 38 mm wide at the crown, a common adult size; children need a smaller core.

Can a headband and scarf share the same print?

Yes, print one repeat on one roll and cut both the scarf and the headband cover from it so the colours match exactly.

How is a printed headband made?

The fabric is printed first, then wrapped over the foam-padded core; sublimation on satin gives vivid, sharp colour.

Who sells padded headbands?

Hair-accessory labels, gift shops, wedding gift sets, and brands matching headbands to dresses or scarves in the same print.

How wide should a padded headband be?

About 4–6 cm finished at the crown for a puffed style; slim 2–3 cm bands usually need no foam.

Sizes available

  • 140 × 160 × 38 mm

Similar mockups