Drint

3D mockups · Device cases

MagSafe phone case

Nº D-11217

Hard PC back, UV-printed, with a Ø46 mm MagSafe magnet ring in the middle (the print covers it, the ring still shows faintly) — fits 6.1-inch phones. Sizes are a guide; measure the real blank before production.

Made for: Tết & gifts, Office & business.

Sample printed on hard PC plastic (UV-printed case) 1.2 mm.

Sample size 77 × 10 × 150 mm.

About this mockup

A 6.1-inch phone case UV-printed on the back, clear of the camera.

Usually holds
Photo cases, brand merch, corporate gifts, marketplace listings.
Who uses it
Accessory shops, print-on-demand sellers, designers, companies ordering gifts.
Popular in
Vietnam, the US, Europe, worldwide.
Also searched as
MagSafe phone case mockup · custom MagSafe phone case · MagSafe phone case printing

How to use this mockup

  1. Start from the 77 × 10 × 150 mm sample or type your own size.
  2. Upload your label or artwork.
  3. Turn it in 3D, export a picture or video, or stage a scene.

Trade tips

  • Clear cases: put white under logos and text, leave bare where the device colour should show.
  • UV ink bonds and cures at once on PC plastic; soft silicone suits few-colour screen printing.
  • Pick the exact device generation first: camera, buttons and port sit differently on each one.
  • Keep 2–3 mm clear around the camera and along the curved edge, where the print distorts.

Questions

Is the magSafe phone case mockup free?

Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.

Can I use my own size for the magSafe phone case?

Yes — from the 77 × 10 × 150 mm sample or your own size.

Can I use the mockup pictures to sell and advertise?

Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.

What is the magSafe phone case sample printed on?

The sample is hard PC plastic (UV-printed case) 1.2 mm.

Construction

A phone case wraps the back and four edges of a phone: a moulded hard PC shell, a flexible TPU case, or a hybrid with a TPU bumper and PC back; it has cut-outs for the camera, port and speakers, and moulded button covers. The print sits on the flat back, and some versions wrap round the curved edges.

Choosing board and material

Clear or white PC with direct UV print for sharp colour; flexible TPU grips and absorbs shocks but clear TPU yellows over time; sublimation cases use blanks with an aluminium insert or heat-resistant polymer coating. The sample simulates the print face on a gloss-laminated paper decal.

Finishing

UV print can lay a white underbase and raised textured ink for feel; gloss or matt clear coat; sublimation for glossy edge-to-edge prints. Clear cases are UV-printed on the inside (reverse) so the image can't scratch.

Preparing the print file

Use the exact template for each model: print area, camera hole and corner radii differ by model, and 1–2 mm off puts artwork into the cut-out. Keep 2–3 mm clear around the camera and edges; 300 dpi at actual size, and for clear cases supply a white underbase channel if you want solid colour.

Common mistakes

  • Using a template for another model with the same screen size: the camera hole is off and the print runs into the lens bump.
  • Logos or signatures in the lower corners: hands cover them and they wear first.
  • Colour on a clear case with no white underbase: washed-out colour with the phone's body showing through.

Questions and answers

How durable is a UV-printed phone case?

UV ink bonds well to PC and resists everyday scratches; edges and corners wear first, so add a protective clear coat.

Do clear TPU cases turn yellow?

Clear TPU usually yellows gradually over some months from light and skin oils; clear PC or anti-yellowing TPU stays clear longer.

Can phone cases be printed in small numbers for gifts?

Yes, digital UV printing works one case at a time; you just need the right blank and a file on the right template.

Sizes available

  • 77 × 10 × 150 mm

Similar mockups