Drint

3D mockups · Gifts & souvenirs

Insulated tumbler with handle and straw

Nº D-11218

1.2-litre double-wall steel, powder-coated, with a twist lid and straw — UV-printed or laser-engraved around the body, clear of the handle. Sizes are a guide; measure the real blank before production.

Made for: Tết & gifts, Office & business.

Sample UV-printed straight on the steel body; a logo can also be laser-engraved.

Sample size 103 × 103 × 300 mm.

About this mockup

A 40 oz handled tumbler with a straw — UV printed or laser engraved round the body, powder-coated in many colours.

Usually holds
Water, coffee and iced tea all day.
Who uses it
Companies, cafés, gift shops.
Popular in
The US, Vietnam, the Philippines, worldwide.
Also searched as
tumbler mockup · 40 oz tumbler with handle · custom straw tumbler · engraved travel tumbler

How to use this mockup

  1. Start from the 103 × 103 × 300 mm sample or type your own size.
  2. Upload your label or artwork.
  3. Turn it in 3D, export a picture or video, or stage a scene.

Trade tips

  • A 360° mug print must join seamlessly behind the handle.
  • Corporate gifts with a small, quiet logo get used longer than ones with a large logo.
  • Paper labels do not like water: use plastic labels for fridges and bathrooms.
  • Gloss lamination deepens colours but shows fingerprints and glare under shelf lights.

Questions

Is the insulated tumbler with handle and straw mockup free?

Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.

Can I use my own size for the insulated tumbler with handle and straw?

Yes — from the 103 × 103 × 300 mm sample or your own size.

Can I use the mockup pictures to sell and advertise?

Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.

What is the insulated tumbler with handle and straw sample printed on?

The sample is paper decal 80 gsm with gloss lamination.

Construction

An insulated tumbler with handle has a double-wall vacuum stainless body, a plastic or stainless handle on one side, a rotating lid with a straw hole and a sliding sip opening, and a plastic or steel straw. The body tapers toward the base to fit car cup holders.

Choosing board and material

304 (18/8) stainless inside in contact with the drink, a 201 or 304 powder-coated outer wall; BPA-free PP or Tritan lid and straw. The 1.2 litre capacity shown (about 40 oz) is the popular large tumbler size.

Finishing

UV print direct round the body for multicolour art, laser engraving through the powder coat to bright steel for the most durable logo, single-colour screen print for volume. The body is tapered, so wraparound art has to be curved to match the taper.

Preparing the print file

Keep artwork clear of the handle (usually 30–40 mm) and 10–15 mm from rim and base; because the body is conical the file needs a fan-shaped (arc) template, not a rectangle. Dimensions are a guide only: measure the real blank from the supplier before making production files.

Common mistakes

  • Using a rectangular file on a tapered body: text prints tilted and curving up at one end.
  • Placing the logo where the handle goes: the handle hides or splits it.
  • Laser-engraving tiny detail on powder coat: lines under 0.3 mm blur and don't show clean steel.
  • Not measuring the real blank: bodies vary by millimetres between suppliers and the print area shifts.

Questions and answers

Does a 1.2 litre tumbler at 103 × 103 × 300 mm fit a car cup holder?

The top is about Ø100 mm but the base tapers (typically Ø75–80 mm), so it fits most car cup holders; still check the base on the supplier's real blank.

What looks good on a 1.2 litre tumbler as a corporate gift?

A laser-engraved logo opposite the handle with the recipient's name small below for personalisation, and a powder coat in the brand colour; avoid full-wrap multicolour print that wears.

UV print or laser engraving on a tumbler?

Laser is the most durable and never washes off, ideal for one-colour logos; UV print handles multicolour art and photos but can wear after many dishwasher cycles.

How long does a tumbler keep drinks cold?

Double-wall vacuum tumblers typically keep ice for several hours up to a day depending on brand and ice; a straw lid loses cold faster than a sealed lid.

Are tumblers dishwasher-safe?

That depends on the maker; powder-coated bodies with UV print are usually hand-wash only to keep the colour.

Sizes available

  • 103 × 103 × 300 mm

Similar mockups