Nº D-11736
Perfume, cosmetics, luxury gifts.
Made for: Tết & gifts, Cosmetics.
Sample printed on ivory (C1S board) 300 gsm, matte lamination; style: folded paper solid box (polyhedron, sphere, star, house, Christmas tree).
Sample size 60 × 120 mm.
An N-sided prism with a pointed tip like a quartz crystal: one sheet, standing on a flat base, one tip face a tuck lid.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 60 × 120 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is ivory (C1S board) 300 gsm with matte lamination, on a dieline drawn at the size you type.
A crystal box is a faceted solid imitating a cut gem: a multi-sided prism body whose two ends taper into bevelled points of triangular or angled facets. It is die-cut from one sheet with facets joined by glue flaps, and the lower end usually has a tuck closure for filling. The angular form relies on crisp creases so each face sits flat like a cut facet.
300 gsm ivory with matt lamination is the base; for a true sparkle, use silver metallised or pearlescent board around 250–300 gsm. Heavy glass perfume bottles need a paper locating insert so the bottle doesn't knock into the point.
Each facet can carry a slightly shifted tone to fake refracted light, or print on metallised board with white underneath wherever opacity is wanted. Holographic foil or spot UV facet by facet makes the box catch the light as it turns; keep heavy coatings off the folded edges.
Treat every face as a facet: lay out light and shade from one imagined light source, brightest on the upward faces and darkest below. Put the logo wholly on the widest body facet, never across an edge. The small point facets should carry no type.
A 60 mm-wide, 120 mm-tall body takes a mini or 10–30 ml decant bottle with its cap; 50 ml bottles and up usually need a 70–80 mm body.
Yes, for cosmetics and premium gifts at Tết: print red or metallic gold on metallised board, with a foiled logo on the widest body facet.
Yes, with a locating tray or paper insert so the bottle doesn't twist inside the facets; include the cap and sprayer when choosing the height.
Print on silver metallised board with a white underlay where colour must be opaque, leaving bare areas to keep the metal shine — very convincing for cut facets.
Most ship flat with one body glue seam and are erected and closed at the point by the packer; the many facets make set-up slower than a square box.