3D mockups · Paper box
Hộp nhựa trong đáy 1-2-3 — đồ chơi, mô hình, bánh.
Made for: Food & specialties.
Sample printed on clear PET plastic 0.35 gsm, uncoated; style: 1-2-3 snap-lock bottom box (tuck lid).
Comes with a real dieline at the exact size: design on the die, then export the files for the printer.
Sample size 70 × 50 × 120 mm; enter your own size to see it to scale.
A snap lock (1-2-3) bottom interlocks four bottom flaps in turn: stronger than a tuck bottom, no glue.
This mockup’s dieline: 1-2-3 snap-lock bottom box
Yes. Turning it in 3D, setting your own size and designing on it are free in the browser, and commercial and client work is allowed. On the Free plan 3D mockups carry a Drint watermark grid and pictures export at 1K; Pro removes the watermark and adds 4K pictures and 2K video.
Yes. Type your size in mm and the mockup is rebuilt to scale, with its dieline.
Yes. The die is drawn at the size you type. A free account downloads one SVG dieline a month; PDF / AI needs Pro; Pro has unlimited dielines, DXF / CF2 for the die-maker and the CMYK print PDF.
Yes. “Use this mockup” opens it in Drint 3D Studio, where you stage it with other products, props and light and export pictures or video.
One die-cut sheet with a single glued side seam. The base has four flaps: fold flaps 1 and 2 in, swing the large flap 3 with its lock slot down, then tuck flap 4 into the slot — no glue. The top is a regular tuck end with dust flaps. Each box is set up by hand in a few seconds.
Ivory board of 300–350 gsm for cosmetics, food and small housewares; for goods over 1 kg, consider 400 gsm ivory or E-flute corrugated. Duplex works when the inside needn't be white.
Matt or gloss lamination, foil, spot UV on the front. The base takes the load when lifted by hand, so laminating the base too keeps the flaps from fraying after repeated set-ups.
Design on the dieline at the true size: four body panels, the lid, dust flaps and the four base flaps. Watch the direction of type: the lid opens toward the back, the front is the main face. The base panel is the place for the barcode and production details. Add 3 mm bleed and leave the glue flap unprinted.
A snap-lock base is folded by hand with a simple die and holds fairly well; a crash-lock base is pre-glued at the factory and locks itself when opened — very fast to pack, but it needs an extra gluing step.
It depends on board and size; a mid-size 350 gsm ivory box is typically used for goods under 1 kg. For heavier goods, test it or move to corrugated.
Yes — the side seam is glued and the boxes ship flat; the packer locks the base when using them.