Nº D-11531
Accessories, cosmetics, cakes — two overlapping end lids, tongue locks into a V slot, no glue.
Made for: Food & specialties, Cosmetics, Fashion & retail.
Sample printed on white-liner corrugated board, uncoated; style: one-piece corrugated box / tray (FEFCO 04xx).
Sample size 200 × 120 × 50 mm.
One-piece E/B-flute boxes folded round the floor, the lid hinged on the back wall — no glue. Variants: lid lock tabs, zipper tear strip, web corners, thumb notch, hand holes, windows.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 200 × 120 × 50 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is white-liner corrugated board with no lamination, on a dieline drawn at the size you type.
The whole box is cut from one sheet of corrugated board in the FEFCO 04xx family: the base is the centre panel, the front and side walls stand up and fold double inward, corner flaps tuck into the sides or hide inside the walls, and the lid hinges off the back wall with a deep tuck flap that drops into a slot at the front. Variants add lid lock tabs, a zipper tear strip, pre-applied tape, carry holes, push-in handles, windows or loose dividers. Boxes ship flat and a packer erects them by hand in seconds, with no gluing.
E flute (about 1.2–1.8 mm) is the standard for gift, cosmetics, bakery and small mailer boxes; B flute (about 2.5–3 mm) for shoe boxes and mailers carrying more than 3–5 kg; F or N microflute, thinner than E, when you want crisp folds close to folding carton. Kraft liners suit 1–2 colour flexo, white liners print cleaner, and for photography and exact brand colours the sheet is printed offset on coated paper and laminated onto E or B flute. Cake and pizza boxes with food touching the board need a food-contact inner liner or a greaseproof sheet.
Litho-laminated boxes should get matt or gloss film against scuffing in transit before any foil or spot UV on the lid logo; kraft flexo boxes look best left natural, with one colour printed inside the lid for the opening moment. Windows are patched with PET or OPP film after die-cutting, while carry holes, push-in handles and zipper strips are cut by the same die and cost no extra pass.
On the flat dieline every doubled wall shows two faces side by side, the inner face turned 180° to the outer; the lid, tuck flap and inside of the lid run in one strip, so artwork must be rotated panel by panel. The lid is the hero face and the front wall is what people read on a shelf or in a delivery carton; put barcodes and shipping labels on the base or a side. Keep 3 mm bleed and hold type 3–5 mm clear of cut and crease lines, and never on corner flaps or tuck flaps.
The two end lids fold over each other like an envelope and the outer layer's tongue drops into a V-slot in the inner one; the top is double thickness and the box closes with no glue or tape.
The two-layer top is stiff and flat with little sag, so a large logo or foil reads beautifully; it suits wallets, watch straps and premium biscuits, where people open slowly and notice details.
Not necessarily: the deep tuck flap and doubled walls keep the lid shut. For courier shipping add a seal sticker, or pick a version with lock tabs or a tear strip that shows the box hasn't been opened.
E flute for goods under about 2–3 kg where you want a neat, well-printed box; B flute for heavy or sharp-cornered goods, or boxes longer than about 350 mm, accepting thicker folds.
A few times, since there is no glue, but the creases weaken; boxes meant for returns or for customers to keep and store things in should be B flute or litho-laminated for durability.