Nº D-11692
Tết gifts, tea, cakes — separate lift-off lid.
Made for: Tết & gifts, Tea & coffee, Food & specialties.
Sample printed on ivory (C1S board) 300 gsm, matte lamination; style: polygon box (5, 6, 7 or 8 sides, triangle, trapezoid, rhombus, fan, folded round).
Sample size 6 side 60 × 60 mm.
Two pieces: a polygon tray and a lid one board and a gap larger — a gift box with a lift-off lid.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 6 side 60 × 60 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is ivory (C1S board) 300 gsm with matte lamination, on a dieline drawn at the size you type.
A polygon lid-and-base box has a separate lid and base, each a polygon panel (5, 6, 7 or 8 sides, triangle, diamond or a near-round 16-gon) plus a wall strip scored at every side. Each wall segment has a locking or glued tab against the panel, and the scores must land exactly on the polygon's corners. The lid is shallower than the base and larger by the board thickness plus 1–2 mm so it slides over; scalloped versions have a wavy die-cut lid skirt.
Ivory 300–350 gsm for gifts, tea, candles and small mooncake boxes; boxes over about 200 mm or holding heavy goods should be laminated to E-flute or made as rigid boxes so the walls don't twist. A round pizza box runs on duplex or E/F flute, with a grease barrier if the pizza sits directly on it. A triangular cake slice box touches food and needs food-contact board or a parchment liner.
Matt lamination with foil on the lid face is the norm for polygon gift boxes; the lid wall can carry a running pattern. Scalloped edges don't like thick gloss film, which can peel at the cut. A blind-embossed logo on the lid looks good but needs a lid wide enough (about 50 mm plus) to emboss well.
Every side of the polygon matches one wall segment, so any wrap-around pattern must line up at N scores, especially at the strip's closing seam. Put the main type on the lid and on the wall that faces forward on the shelf, and mark that front on the file so it's folded the right way. 3 mm bleed; keep type at least 2 mm from scores.
The 60 × 60 mm sample fits a small cake, a tea sachet or a sample gift; a 100–200 g tea box is usually 70–90 mm per side and 100–150 mm tall. Measure the product and add 2–3 mm.
A board insert with a hexagonal cut-out 1–2 mm smaller per side than the base holds a tin or jar upright in the centre. Plan it early; a square insert won't fit a hexagon.
300–350 gsm ivory is enough under about 150 mm; larger boxes need E-flute lamination or a rigid board build wrapped in art paper.
Tab-locked versions ship flat and are set up by hand; corner-glued ones ship pre-formed, look crisper but take more space.
Hexagons and octagons look balanced and are easy to fit inserts in; pentagons and heptagons are striking but awkward inside. More sides look rounder and take more folding.