Nº D-11705
Wine, Tết gift liquor — 2 upright bottles.
Made for: Tết & gifts, Beverages.
Sample printed on ivory (C1S board) 300 gsm, matte lamination; style: polygon box (5, 6, 7 or 8 sides, triangle, trapezoid, rhombus, fan, folded round).
Sample size 95 × 190 × 110 mm.
A rectangular tray with a carry board down the middle and slotted dividers — keeps bottles, cans and cups upright on the go.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 95 × 190 × 110 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is ivory (C1S board) 300 gsm with matte lamination, on a dieline drawn at the size you type.
A paperboard carrier is one folded blank with partitions forming cells and a handle in the centre or on top; the base is usually a tuck or pre-glued lock bottom, bottles and cans stand in the cells with necks showing. A cup carrier tray is a low form with round holes gripping the cups. Most ship flat and are set up by hand at the counter.
Ivory board of 300–350 gsm suits can carriers and light cup trays; glass bottle carriers need 350–400 gsm, tough virgin kraft board or a laminate onto E flute, because six 330 ml beer bottles weigh about 3 kg. Chilled drinks sweat, so choose a moisture-resistant board or full lamination.
Matt or gloss lamination against condensation from cold bottles, then foil or spot UV on the handle and sides; Tết wine carriers suit red and gold foil. Round the edges of hand holes and keep lamination from running right to the edge so it doesn't peel when gripped.
The handle and two long sides carry the main print; inner partitions are mostly hidden and can stay plain. Size each cell to the real bottle diameter plus 2–3 mm and make the carrier at least shoulder height. Keep type 5–10 mm clear of hand holes and lock slots.
A standard 750 ml wine bottle is about 75–80 mm across and about 300 mm tall; this carrier grips the lower body of two bottles side by side, so measure real bottles, as sloped-shoulder Burgundy bottles run wider than Bordeaux.
Matt lamination, gold or red foil for the Phúc character, the brand on both sides; use board of 350 gsm or more or E-flute lamination, as two bottles of wine weigh about 2.5–3 kg.
A laminated 350 gsm ivory carrier handles about 1.5–2 kg; a six-pack of glass beer bottles at about 3 kg needs tougher board or E-flute lamination.
Yes, usually pre-glued along the side seam and folded flat; at the counter you open it, lock the base and drop the bottles in.
A paper carrier keeps bottles and cans upright and apart, carries branding and recycles more easily; a plastic bag is cheaper but bottles lean over and there's nowhere to print.