Nº D-11685
Triangle sandwiches, sub sandwiches.
Made for: Food & specialties.
Sample printed on ivory (C1S board) 300 gsm, matte lamination; style: polygon box (5, 6, 7 or 8 sides, triangle, trapezoid, rhombus, fan, folded round).
Sample size 3 side 80 × 120 mm.
An open polygon sleeve: wraps a box, a tray or a cake — carries the label, holds the lid, frames the product.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 3 side 80 × 120 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is ivory (C1S board) 300 gsm with matte lamination, on a dieline drawn at the size you type.
A sleeve is a strip of board folded into a polygon tube open at both ends, glued along one seam or locked with two tabs, and slid over a tray or cake box. It holds the tray lid on and carries the brand and information instead of printing the whole pack; the triangular version hugs a film-wrapped sandwich wedge.
250–300 gsm ivory or kraft is plenty because a sleeve carries no load, it only wraps; sleeves on chilled food trays should be laminated against condensation. As long as a tray or film sits inside, the sleeve doesn't touch the food and needn't be food-contact board.
The sleeve concentrates the branding, so foil, spot UV or one bold colour on kraft all work well. Matt lamination lets it slide on smoothly without scuffing.
The widest face is the front; put product name, ingredients and dates required on the label on the back or underside. The sleeve's inside perimeter should be 2–4 mm larger than the tray's so it slides on without being loose; keep the barcode on a flat face, never across an edge.
The 80 mm-sided, 120 mm-long sleeve slides over a film-wrapped sandwich wedge, open at both ends so the filling shows; it costs less than a closed wedge box yet carries the name and date.
Only lightly; sandwiches stacked in a chiller still need a plastic or card wedge inside, with the sleeve handling branding and information.
Yes. It is label and lid-holder in one, looks more finished than a sticker and changes seasonally without changing the tray; it still has to carry all mandatory information.
Yes. Glued sleeves ship flat and are popped open to slide the tray in; tab-locked versions arrive as flat blanks.
Covering 40–60% of the tray length holds it securely while showing the product; extend it near the tray edge if it should also act as a tamper seal.