Nº D-11538
Cupcakes, pastries, small gifts.
Made for: Tết & gifts, Food & specialties.
Sample printed on ivory (C1S board) 300 gsm, matte lamination; style: box with built-in handle (gable top).
Sample size 160 × 120 × 100 mm.
Paperboard tube boxes on a snap-lock bottom with a fold-over top: the lid halves stand up as a hand-hole handle, or end covers lift arch handles through slits in the top covers.
This mockup’s dieline: Gable box with handle
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 160 × 120 × 100 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is ivory (C1S board) 300 gsm with matte lamination, on a dieline drawn at the size you type.
A built-in handle box is cut from one blank: a four-panel body with one side glue seam, a tuck or crash-lock base, and two tall top flaps that stand up and meet, each with a hole or arch handle pre-cut. Folded together, the handles line up into one grip and locking tabs close the top. Variants thread a rope handle through both top layers, or add an arched front window patched with PET.
Ivory 300–350 gsm for cakes, cupcakes and light toys; brown kraft 250–350 gsm for a natural look and takeaway food. Die-cut paper handles only carry light goods, usually under about 1–1.5 kg; heavier contents need a rope handle or E-flute lamination. Boxes for cream cakes and cupcakes touch food and need a grease-resistant liner or food-grade coated board.
Matt or gloss lamination makes the handle tougher and stops the cut-out tearing; raw kraft looks best with one or two dark inks. A PET window must sit at least 15 mm from scores and from the handle. Avoid foil in the handle area, where hands rub it off.
The two raised top flaps are what people see while carrying, so put the big logo there, clear of the handle cut-out and scores. The four body panels take the product name and information; the tuck base is usually hidden, so nothing important there. Check print direction: when folded, the inside of one flap shows above the other, so test with a folded proof.
The 160 × 120 × 100 mm sample fits 2 standard cupcakes on an insert with Ø50–60 mm holes; for 4 or 6, lengthen it and keep the height over 90 mm so the frosting isn't touched.
A folded board insert with round holes sized to the cupcake liners stops them sliding when the box tilts. Use the same food-grade board.
A die-cut handle in 300–350 gsm ivory suits under about 1–1.5 kg; heavier goods need a rope handle, E-flute lamination or a crash-lock base.
Yes, they ship flat and set up by hand in seconds; a crash-lock base springs open when the body is squared.
A crash-lock base is fast and strong for weighted goods; a 1-2-3 tuck base is cheaper and fine for light items like cupcakes and small gifts.