Nº D-11889
Coloured pencils, crayons — a pull-out drawer, one layer of 12.
Made for: Fashion & retail.
Sample printed on duplex (grey back) 300 gsm, matte lamination; style: paper drawer box (tray + slide sleeve).
Sample size 185 × 95 × 14 mm.
A paper drawer box: a tray slides out of a sleeve — far cheaper than rigid, yet with the same slide-out reveal; common for chocolate, macarons, jewellery and soap.
This mockup’s dieline: Drawer box (sleeve and tray)
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 185 × 95 × 14 mm sample or your own size, with the dieline redrawn.
Yes, with Pro: the die files (SVG, PDF / AI, DXF / CF2) and the CMYK print PDF; designing on the die is free.
The sample is duplex (grey back) 300 gsm with matte lamination, on a dieline drawn at the size you type.
Two loose parts: the sleeve, a four-panel tube with a glued side seam and both ends open, and the tray, folded from one sheet with double walls that turn inward and lock tabs into the base, no glue. The tray slides in from one end and is pulled out by a ribbon, a thumb notch or a cut-out in the sleeve. The sleeve's inside must be about 1–2 mm larger than the tray each way plus board thickness, so it slides smoothly without rattling.
Ivory board of 300–350 gsm for gifts, jewellery, chocolate and tea; the inside is clean white when the tray opens. Large boxes such as shoe drawers want 350–400 gsm duplex or E-flute so the sleeve doesn't crush when stacked. Food such as chocolate or macarons needs a greaseproof liner or a formed plastic insert in the tray.
The sleeve is seen first, so it suits matt or soft-touch lamination, foil logos, embossing and spot UV. The tray can carry a solid colour or a pattern inside for a reveal as it slides out. Lamination adds thickness and stiffness, which must go into the sliding tolerance.
Two dieline files: the sleeve (four panels plus glue flap, ends open) and the tray (base, four double walls, lock tabs). The sleeve top is the hero face; let patterns wrap over the creases onto the sides. On the tray, the inner faces of the folded walls and the tray floor carry the reveal; the outer walls are hidden by the sleeve and need little design.
A paper drawer box is die-cut from 300–350 gsm board, ships flat, light and economical. A rigid drawer box wraps paper over 1.5–2.5 mm greyboard, stands firmer and feels more luxurious, but can't fold flat and takes storage.
The glued sleeve still presses flat; the locking tray ships flat and is set up at packing. Each tray takes some tens of seconds to erect, so allow for packing time.
A ribbon looks premium and pulls easily but must be threaded by hand on every box. A thumb notch or half-moon cut is die-cut into the sleeve at no extra labour, ideal for big runs.