Drint

3D mockups · Labels, stickers, tags, red envelopes

Blister pack on printed card

Nº D-11262

Thermoformed PET blister hugging the product, heat-sealed to a card printed both sides — toys, phone accessories, tools, batteries on retail hooks.

Made for: Household & chemicals, Fashion & retail.

Sample printed on duplex (grey back) 350 gsm, gloss lamination; style: gifts & souvenirs.

Sample size 150 × 32 × 230 mm.

About this mockup

A blister is thermoformed round the product and heat-sealed to a card printed both sides with a hang hole — peg-hook retail where shoppers see the real product and read the card.

Usually holds
Toys, phone accessories, tools, batteries, brushes, small cosmetics.
Who uses it
Accessory, toy and tool brands; retail distributors.
Popular in
Worldwide.
Also searched as
blister card mockup · blister on card · peg hook packaging · clamshell blister

Trade name

Trade name
Blister card
Also called
blister pack · skin pack on card
Used for
toys, batteries, hardware, electronics

How to use this mockup

  1. Start from the 150 × 32 × 230 mm sample or type your own size.
  2. Upload your label or artwork.
  3. Turn it in 3D, export a picture or video, or stage a scene.

Trade tips

  • Labels need 1.5–2 mm safety and 2 mm bleed: label die-cutting drifts more than carton cutting.
  • Swing tags need the punched hole at least 5 mm from the edge so it does not tear.
  • Grey-backed duplex costs less than ivory; its grey inside is best left unprinted.
  • Gloss lamination deepens colours but shows fingerprints and glare under shelf lights.

Questions

Is the blister pack on printed card mockup free?

Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.

Can I use my own size for the blister pack on printed card?

Yes — from the 150 × 32 × 230 mm sample or your own size.

Can I use the mockup pictures to sell and advertise?

Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.

What is the blister pack on printed card sample printed on?

The sample is duplex (grey back) 350 gsm with gloss lamination.

Construction

A blister pack has a clear PET or PVC shell thermoformed to the product and a card printed on both sides; the blister's flat flange is heat-sealed to a heat-seal coating on the card face. The top of the card has a euro slot or round hole; clamshell and slide blisters need no sealing.

Choosing board and material

The card is usually duplex or ivory of 300–400 gsm, its printed face coated with heat-seal (blister) varnish for the plastic to bond; PET blisters of 0.25–0.5 mm are clear and recyclable, PVC is cheaper but harder to recycle. Heavy or sharp products need a thicker blister and card.

Finishing

The card is offset-printed and coated with heat-seal varnish overall or in the seal zone; don't laminate the seal area, as the plastic won't bond. Foil and spot UV can go outside the blister area.

Preparing the print file

Design with a layer showing the blister over the card: the area under the blister is covered by the product, so put the name and hero image on the upper card or the visible area; the back carries mandatory information and the barcode. Keep the 6–10 mm seal band round the blister free of small text, and the hang hole 6–10 mm below the top edge.

Common mistakes

  • Laminating the whole card: the blister won't seal and falls off on the hook.
  • Product name right behind where the product sits: it gets hidden.
  • Card too thin for heavy goods: it bows and the hang hole tears.

Questions and answers

How heavy a product can a 150 × 230 mm blister card hang?

350 gsm duplex with a well-sealed PET blister usually holds a few hundred grams; tools above about 500 g need 400 gsm card, a thicker blister or a clamshell.

What goes on the back of a 150 × 230 mm blister card?

Mandatory label information for the target market (in Vietnam, Decree 37/2026/NĐ-CP: product name, origin, responsible party), directions, warnings and barcode, in legible type.

How is a blister sealed to a paper card?

The card is coated with heat-seal varnish; the blister is placed on it and pressed with a heated sealing tool so the plastic bonds to the coating.

What is the difference between PET and PVC blisters?

PET is clear, impact-resistant and recyclable; PVC is cheaper and forms easily but is harder to recycle and restricted in some markets.

What products suit hanging blister packs?

Toys, phone accessories, batteries, hand tools, small cosmetics and stationery sold on retail hooks.

Sizes available

  • 150 × 32 × 230 mm

Similar mockups