3D mockups · Wood, bamboo, ceramic & cloth
Nº D-11272
Natural bamboo cut close to the node, bamboo cap — paper label round the body or laser engraving; tea, coffee, salt, souvenirs.
Made for: Tea & coffee, Food & specialties.
Sample printed on paper decal 80 gsm, matte lamination; style: gifts & souvenirs.
Sample size 70 × 70 × 238 mm.
Natural bamboo cut close to a node for the bottom, a wider piece of cane as the cap — a paper label round the body or laser engraving.
Yes, commercial use included; Free adds a watermark grid at 1K, Pro exports 4K without it.
Yes — from the 70 × 70 × 238 mm sample or your own size.
Yes, on every plan including Free: use them on your website, marketplaces, social media and for clients. Pro removes the watermark and exports 4K pictures.
The sample is paper decal 80 gsm with matte lamination.
A lidded bamboo tube is cut from a length of bamboo just below a node, so the base is naturally closed, with the rim sanded flat; the lid is a wider ring of bamboo that slips over or a narrower section that plugs in. The bamboo is boiled, dried and treated against mould and borers before holding food.
Mature, straight bamboo of 60–90 mm diameter; each tube varies by a few millimetres in width and wall thickness. For tea, coffee or salt add a film or paper liner inside against damp and bamboo odour; the outside can be oiled or water-based varnished.
Laser engraving on the skin gives a deep-brown logo; a paper label round the body (matt-laminated paper decal as in the sample, kraft or handmade paper) carries more information; stamping or screen printing on bamboo is hard because the surface is curved and waxy.
A wrap label is the tube's circumference plus 10–15 mm overlap, with tolerance because bamboo diameters vary; keep it within the body between nodes and clear of the lid edge. Required goods information under Vietnam's Decree 37/2026/NĐ-CP goes on the label, with the logo engraved on the lid or body.
An inside of about Ø60 mm by 200 mm after the lid and base holds roughly 100–150 g of loose tea or 200–250 g of coffee beans depending on packing.
The circumference is about 220 mm, plus 10–15 mm overlap, so the label is about 230–235 mm; allow a few millimetres extra for the widest tube in the batch.
Usually, once boiled, dried and treated against mould and borers with a food-safe method; line it with a food bag to keep aroma in and moisture out.
Laser engraving is the most attractive and durable; for multiple colours, add a paper label round the body.
Tea, coffee, salt, pepper, regional gift foods, incense and pens; handcrafted, eco-friendly gift packaging.